APW3++ 电源

APW3++ 电源

分享
  • 产品详情
  • 产品参数

可带任一官网产品      For one S9 or one L3+ or one D3

重量Weight：3kg

注意：因各个国家和地区电源插头不一样，本品不包含220V端电源线。电源6PIN线接口为18条。

规格描述

APW3++ -12-1600系列AC-DC电源具有转化效率高，输出动态性能好，高功率密度等优点，具有过温、过流、欠压等保护，适合于1600W及以下DC 12V供电的电子设备。


1.包装尺寸：32.7*16.8*12.6cm
2.包装重量：2.3KG

特点：

100-240V宽电压输入

可外部远程开关机（内部预留端口）

主动功率因数校正功能，PF＞0.99（满载）

最高点效率可达93.5%

内有短路、过载、过温保护

散热风扇随温度自动调节速度

高功率密度，只有1.4U的高度尺寸

改善散热布局

用户可自行更换输出线和微调输出电压

1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
4. The shipping for this batch will start soon after 1st December 2017, depending on when the units are ready to ship out and your position in the order queue.
5. All items added to cart are shipped according to the item with the latest shipping date in the cart. If you would like to receive an item earlier, please place a separate order for it.
6. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won't be honored.






输出

直流电压(220V输入)

12.15V

额定电流(220V输入)

133A

额定功率(220V输入)

1600W

直流电压(110V输入)

12.15V

额定电流(110V输入)

100A

额定功率(110V输入)

1200W

纹波与噪声

<1%

电压精度

<2%

源调整率

<1%

负载调整率

<1%

启动、上升时间

<2S

掉电保持时间

>9mS

输入

电压范围

100-240V AC

启动电压

95-105V AC

频率范围

47-63Hz

功率因数

>0.95(full load)

漏电流

<1.5mA（220V 50Hz）

保护

输入欠压

80-89V AC

输出短路

有

输出过流

134-185A MAX

过温保护

有

环境

工作温度

-20-50℃（请参照减额曲线）

工作湿度

20%-90%RH(无结露)

结构

尺寸

220mm*108mm*62mm

重量

2.05KG

冷却方式

风扇

强制风冷



Specifications




Output

DC Voltage

12.15V

Rated Current
(220V input)

133A

Rated Current
(110V input)

100A

Rated Power
(220V input)

1600W

Rated Power
(110V input)

1200W

Ripple & Noise

<1%

Voltage Regulation

<2%

Source Regulation

<1%

Load Regulation

<1%

Setup, Rise Time

<2S

Power off Protection Trip Time

>9mS

Interface Type

5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Noise Level

<43DB

Input

Voltage Range

100-240V AC

Starting Voltage

95-105V AC

Frequency Range

47-63Hz

Power Factor

>0.95 (full load)

Leakage Current

<1.5mA (220V 50Hz)

Protection

Low-voltage Input

80-89V AC

Output Short Circuit

Yes

Output Overcurrent

134-185A max.

Overheat Protection

Yes

Environment Conditions

Operating Temperature

-20°C - 50°C

Operating Humidity

20% - 90% relative humidity (non-condensing)

Structure

Dimensions

220mm*108mm*62mm

Cooling

Fan

Forced-air cooling

Efficiency Test Curve       Load versus temperature derating curve

                 Efficiency Test Curve                                                    Load versus temperature derating curve


售后政策

矿机不同于消费类电子产品，而是根据顾客需求特殊定制的、用于投资的产品，投资需谨慎。本产品为矿机电源，售后服务政策如下，一旦购买，即视为对本政策的认同。

1. 无论是否发货，付款后均不能退款、退货。
2. 矿机产品的保修期为自发货之日起180天。
3. 由于市场波动，在您购买后，产品价格可能会随时调整。我们不承担事先通知、价格补偿的义务。


以下情况会使保修失效：

1.电源本身被拆卸，私自改动、更换元器件；
2.雷击，电压浪涌等造成的损坏；
3.电路板存在烧毁痕迹的或者芯片被烧毁的；
4.进水、电路板和元器件受潮、出现腐蚀造成的损坏；


如果发生了以上情况，我们为您提供收费维修服务。具体流程请参考商城的售后流程。

1. A twelve months' warranty is provided starting from the ship-out date. To avail this warranty a Repair ticket must be generated by the customer on Bitmain's website. Overclocking the miner will void the warranty immediately.

2. All sales are final. No refunds will be granted. Defective PSU can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

3. The following events will void the warranty:
   a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
   b. Damage caused by poor power cable, lightning or voltage surges;    


4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain's instructions.

5. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.


6. If you notice there are some loose parts when you receive the PSU, please inform us by submitting a ticket within 3 days from the date the package is received according to UPS/DHL/FEDEX's website.

Please read Bitmain's Terms & Conditions for a complete list of conditions and terms that apply to all orders placed on Bitmain.com




价格(元)
590－650